top of page
HDSP-0.2A
  • 1,600 W, 2 x 800 W an 4 Ω
  • 2 channel DSP amplifier with single-technology
  • 1 power supply, DSP-board and Class-D module
  • Integrated loudspeaker management systems (DSP) with audiophile sound quality
  • 80 preset locations
  • Software control via Ethernet interface (HDSP-0.2A also USB)
  • Intelligent wide-range switching power supplies with automatic worldwide voltage adjustment
  • Dust protected by modular upside-down board assembly
  • Very quiet, temperature controlled low-noise EBM Papst fan
  • Tough, road-ready, stable and yet light aluminum housing

HDSP-0.2A

  • Quantity channel
    2 CH, class-D latest generation

    Power output 4 Ω
    1,600 W (2 x 800 W)

    Power output 8 Ω
    900 W (2 x 450 W)

    Power output 16 Ω
    400 W (2 x 200 W)

    Damping factor
    > 1000 / 8 Ω, 1 KHz

    Frequency responce
    20 ~ 20,000 Hz

    THD+N
    < 0.05 % (20 ~ 20,000 Hz with 8 Ω)

    Signal-to-noise ratio
    > 118 dB (20 ~ 20,000 Hz with 8 Ω)

    Voltage
    Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
    85 - 135 V = 110 / 115 / 120 V Betrieb, 190 - 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz

    Powerconnector
    1 x 16 A Neutrik PowerCon IN

    Signal connection analog INPUT/LINK
    2 x XLR female/male

    Signal connection digital AES/EBU INPUT/LINK
    1 x XLR female/male (only HDSP-0.2D)

    Speaker Connections
    2 x Speakon

    Network connection
    Additional rear RJ45 socket for wired network in fixed installations (only HDSP-0.2A)
    Additional rear DSP-LAN socket for wired network in fixed installations (only HDSP-0.2D)

    Cooling
    2 x temperature-controlled EBM-Papst low noise axial fan, air flow front to back

    Protection
    Input limiter, peak limiter
    Start-up current limiting (soft start)
    Protection circuit on and off transients
    Under and over-voltage protection
    DC-protection of outputs
    Temperature monitoring of the heatsink and transistors

    Realtime software-monitoring
    Loudspeaker impedance measuring from each output channel (line-control)
    Temperature measuring from each ampmodule
    Real time meterbridge on PC per channel
    Real time access for configuration on each channel
    Speaker group building for access multiple speakers with one command

    DSP sampling
    64 bit, 96 kHz sample rate

    DSP preset memory quantity
    80 preset locations

    Latency
    0 - max. 500 microsecond

    Dynamic range input
    120 dB

    Nominal input level
    + 6 dBu

    Maximum input level
    + 23 dBu

    Limiter
    Two per way, in each input and output

    Filter
    10 parametric filter each in- and output, use as Bell, Shelving, Notch, or Allpass filter

    Long delay section
    0 - 800 ms (max. 275 m delay) in each input

    Short delay section
    0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

    Phase adjustment
    0 - 180°

    X-Over
    Butterworth, Bessel, Linkwitz-Riley Filter

    Software
    Bi-directional realtime VA-WLAN-remote network, software for PC and MAC

    Manual hand operation
    with 2 x button and 1 x digital encoder-wheel in the internal menu navigation, function lockable

    Display
    1 x LED display
    1 x LCD display with software dimmable and switchable

    Body housing
    19"/2 HE, 430 mm deep, strong black colored aluminum housing

    Weight
    3.1 kg

  • The HDSP-0.2A and 0.2D are 2-channel DSP amplifier with dual technology and have an output power of 1,600 W into 4 Ω.

    The Voice-Acoustic HDSP amplifier series has been developed with the most demanding requirements in audio quality and reliability in mind. With the high number of output channels, for the first time, it has become possible to separately filter bi and tri amping with the HDSP series cost effectively. The intelligent wide-range switching power supply automatically detects the AC input values making it possible to use anywhere in the world.

bottom of page