Modular-10

Speaker drivers
1 x 10" Neodym woofer (LF) with 2.5" voice coil, cone waterproof treatment
1 x 1" Neodym compression driver (HF) with 1.7" voice coil

System
2-way, scalable multi-functional loudspeaker

Frequency range
70 Hz - 22 KHz (- 10 dB)
107 Hz - 21 KHz (+- 3 dB)

Coverage range (h x v)
90° x 40° (arrayable and rotable horn)

Monitor slants
50° and 20°

Impedance bi-amping
LF 8 Ω / HF 8 Ω

Powerhandling LF 8 Ω
350 W AES / 700 W program / 1,400 W peak

Powerhandling HF 16 Ω
50 W AES / 100 W program / 200 W peak

Sensitivity dB SPL 1 W/1 m
100 dB SPL

Sound pressure at (AES / program / peak)
125 dB SPL / 128 dB SPL / 131 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT, 1+/- HF, 2+/- LF, passive 1+/1-

Handles
3 x shell type handle

Foot
7, each 4 x monitor site and 3 x bottom

Mounting
2 x Easyfly mechanism for vertical and horizontal Mounting
1 x back-facing Flying Track for safety cable
8 x M10 rigging points with 5 mm steel interior angles
2 x M6 point on the back side for adjustable wall holder
1 x tilting pole socket +/- 18°, tilt for a stand or mounting pole

Housing
24 and 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
520 (h) x 321 (w) x 267 mm (d) / 15.3 kg

The Modular-10 is a compact and powerful multifunctional loudspeaker with high-quality 10"/1" neodymium drivers and passive crossover.

The Modular series is extremely flexible and is innovative with its combination of array point source systems and multifunctional usable individual speakers. As well as its use as a single full-range speaker, with high performance head with bass support and high-performance monitor on stage, the Modular series also designed to be used with multiple units next to each other, in a horizontal array design.

Any interference and associated sound interruptions between the sound sources are reduced to a minimum by using special housing geometry, suitable for the narrower beam angle of the rotatable horn. Each horn works only in its defined sound directivity. This technique allows the user an even greater range of applications with only one speaker model and is registered at the Patent Office.

"Easyfly", (also registered with the Patent Office), is a new ‘one-click’ mechanism which allows tool-free hanging and precise alignment in a few seconds. The mechanism is more elegant and smaller than a conventional rigging brace. The Modular series is equipped with inconspicuous mounting rails on two sides of the housing. This means the speaker can be hung or flown upright or horizontally, using the ‘Easyfly’ mechanism. At the back is a third mounting rail for the compulsory safety cable.

For accurate alignment on a stand or mounting pole, the Modular series has an internal, tilting pole socket enabling and an adjustment of +/- 18° tilt.

The Modular-10 uses a 10" chassis of the latest generation and has been specifically designed for a clean, detailed midrange with a high, undistorted sound pressure. A particularly low moving mass (mms 31g) in conjunction with the extremely powerful neodymium driver (B/L factor 20) enable a very high sound pressure. The chassis can be driven hard, and heat dissipates optimally keeping the power compression low. The magnet system use ventilation openings in. The aluminum demodulation rings in the magnet system ensure low distortion.

The Modular-10 can be installed with the ‘Easyfly’ mechanics, via the rear mountable tilt and swivel wall mount, or the 8 internal M10 thread points with steel angles.