Paveosub-218

Speaker drivers
2 x 18" Neodym long excursion woofer (LF) with 4" voice coil, cone waterproof treatment

System
Bass reflex subwoofer

Lower cut-off frequency
32 Hz (- 10 dB)
36 Hz (- 3 dB)

Coverage range (h x v)
Omnidirectional

Impedance
4 Ω active separated

Powerhandling LF 4 Ω
2,400 W AES / 4,800 W program / 9,600 W peak

Sensitivity dB SPL 1 W/1 m
102.5 dB SPL (half space)

Sound pressure at (AES / program / peak)
136 dB SPL / 139 dB SPL / 142 dB SPL

Connectors
4 x Neutrik NL4 Speakon IN/OUT, 2+/- LF

Handles
8 x shell type handle with drip cap

Foot
8 x with opposite stacking trays

Fittings
2 x M20 pole mount
2 x latches on the front for detachable wheelboard

Housing
Strong strutted 15 mm birch plywood CNC machine-splined and bolted

Finish
Polyurea coating in RAL 9005, optionally water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days

Front grille
Galvanized and powdered black 2 mm honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
600 (h) x 1,160 (w) x 770 mm (d) / 80.5 kg

The Paveosub-218 is a heavily vented bassreflex subwoofer designed for highest quality mobile and installation application.

Two premium 18" neodymium transducers make sure it can deliver powerful and distortion-free sound pressure levels while still providing a dynamic and low bass. Low moving mass coupled with a powerful neodymium motor provide precise signalreproduction with excellent transient response which sonically outclasses other 18" designs. A large format and powerful voice coil together with sophisticated cooling convert amplifier power more efficiently and keep powercompression low even at longterm maximum power.

Large format ports increase efficiency and prevent annoying vent noise across the whole performance range. The design of the ports further strengthens the cabinet's top and bottom. Additional reinforcement and bracing prevents resonances, increases rear attenuation and turns the
Paveosub-218 into an extemely robust and ideal touring subwoofer.

There are 8 optimized handles accessible from any direction (they even include drains !) so you won't break your back

You won't strain your back during transport and set-up due to 8 optimized handles (they even include drains !) which are easily accessible from any direction.

The subwoofer can be used horizontally or upright and provides. Stacking trays and two M20 pole mount as well as foots on the opposite side. When used upright it forms an elegant package together with the Ikarray-12 due the same 60cm width of the system. The stacking trays are made to fit Ikarray OPER-frames and Ikarray Gound-Stacking-Boards.

In addition to the rear connector panel you can find two additonal Speakon connectors on the robust front grille. They provide easy access when the subwoofer is positioned under the stage floor or when cabinets are turned around for creating cardioid arrays. This way cables can be kept out of sight from the audience. The front connectors as well as the loop-through connector on the rear panel use rubber caps to protect them from moisture.

There are three options for transport:
- the cabinet can be fitted with 100 mm bluewheels on the rear side (16 x M6 fittings)
- via stackable front transport covers including wheels and butterfly latches
- a dolly can carry up to 3 subwoofers

Voice-Acoustic provides upgrades for Paveosub-218 to the self-powered version by fitting 4 kW aplifier modules and DSP board.